Cafe CXE22DP2PS1 - Manual de uso - Página 7

Cafe CXE22DP2PS1

Frigorífico Cafe CXE22DP2PS1 - Manual de uso, léela gratuitamente en línea en formato PDF. Esperamos que esto te ayude a resolver cualquier duda que puedas tener. Si tienes más preguntas, contáctanos a través del formulario de contacto.

1 Page 1 2 Page 2 3 Page 3 4 Page 4 5 Page 5 6 Page 6 7 Page 7 8 Page 8 9 Page 9 10 Page 10 11 Page 11 12 Page 12 13 Page 13 14 Page 14 15 Page 15 16 Page 16 17 Page 17 18 Page 18 19 Page 19 20 Page 20 21 Page 21 22 Page 22 23 Page 23 24 Page 24 25 Page 25 26 Page 26 27 Page 27 28 Page 28 29 Page 29 30 Page 30 31 Page 31 32 Page 32 33 Page 33 34 Page 34 35 Page 35 36 Page 36 37 Page 37 38 Page 38 39 Page 39 40 Page 40 41 Page 41 42 Page 42 43 Page 43 44 Page 44 45 Page 45 46 Page 46 47 Page 47 48 Page 48 49 Page 49 50 Page 50 51 Page 51 52 Page 52 53 Page 53 54 Page 54 55 Page 55 56 Page 56 57 Page 57
Página: / 57
Página anteriorPágina siguiente
Cargando la instrucción

36

49-1000329 Rev. 5

WHAT YOU WILL NEED (Cont.)

NOTE:

The only Café approved plastic tubing is

that supplied in SmartConnect

™

Refrigerator Tubing

kits. Do not use any other plastic water supply line
because the line is under pressure at all times.
Certain types of plastic will crack or rupture with age
and cause water damage to your home.

• A GE Appliances water supply kit (containing

tubing, shutoff valve and fittings listed below)
is available at extra cost from your dealer or
by visiting

cafeappliances.com

(in Canada,

cafeappliances.ca

).

• A cold water supply. The water pressure must be

between 20 and 120 p.s.i. (1.4–8.1 bar).

• Power drill.

‡´RUDGMXVWDEOHZUHQFK

• Straight and Phillips blade screwdriver.

‡7ZR ´RXWHUGLDPHWHUFRPSUHVVLRQQXWV

DQGIHUUXOHVVOHHYHV²WRFRQQHFWWKHFRSSHU

tubing to the shutoff valve and the refrigerator
water valve.
OR

• If you are using a SmartConnect

™

Refrigerator

Tubing kit, the necessary fittings are preassembled
to the tubing.

• If your existing copper water line has a flared fitting

at the end, you will need an adapter (available
at plumbing supply stores) to connect the water
line to the refrigerator OR you can cut off the
flared fitting with a tube cutter and then use a
compression fitting. Do not cut formed end from
SmartConnect

™

Refrigerator tubing.

• Shutoff valve to connect to the cold water line.

The shutoff valve should have a water inlet

ZLWKDPLQLPXPLQVLGHGLDPHWHURI´DWWKH

point of connection to the COLD WATER LINE.
Saddle-type shutoff valves are included in many
water supply kits. Before purchasing, make sure
a saddle-type valve complies with your local
plumbing codes.

1

SHUT OFF THE MAIN WATER

SUPPLY

Turn on the nearest faucet long enough to clear the
line of water.

2

CHOOSE THE VALVE

LOCATION

Choose a location for the valve that
is easily accessible. It is best to
connect into the side of a vertical
water pipe. When it is necessary to

FRQQHFWLQWRDKRUL]RQWDOZDWHUSLSH

make the connection to the top or
side, rather than at the bottom, to
avoid drawing off any sediment from
the water pipe.

3

DRILL THE HOLE FOR THE

VALVE

'ULOOD´KROHLQWKHZDWHUSLSHHYHQLIXVLQJD

self-piercing valve), using a sharp bit. Remove any
burrs resulting from drilling the hole in the pipe.

Take care not to allow water to drain into the drill.

)DLOXUHWRGULOOD´KROHPD\UHVXOWLQUHGXFHGLFH

production or smaller cubes.

Installation Instructions

Install the shutoff valve on the nearest frequently
used drinking water line.

INSTALLING THE WATER LINE (Cont.)

INST

ALLA

TION INSTRUCTIONS

Página anteriorPágina siguiente

"Cargando la instrucción" significa que debes esperar hasta que el archivo se cargue y puedas leerlo en línea. Algunas instrucciones son muy grandes y el tiempo de carga depende de la velocidad de tu conexión a Internet.

Otros modelos de frigoríficos Cafe

Todos los frigoríficos Cafe