GE UCC15NPRII - Manual de uso - Página 2

GE UCC15NPRII
Página 1 Instrucción original completa
1 Page 1 2 Page 2 3 Page 3 4 Page 4 5 Page 5 6 Page 6 7 Page 7 8 Page 8 9 Page 9 10 Page 10 11 Page 11 12 Page 12 13 Page 13 14 Page 14 15 Page 15 16 Page 16 17 Page 17 18 Page 18 19 Page 19 20 Page 20 21 Page 21 22 Page 22 23 Page 23 24 Page 24 25 Page 25 26 Page 26 27 Page 27 28 Page 28 29 Page 29 30 Page 30 31 Page 31 32 Page 32 33 Page 33 34 Page 34 35 Page 35 36 Page 36 37 Page 37 38 Page 38
Página: / 38
Página anteriorPágina siguiente
Cargando la instrucción

16

49-1000437 Rev. 0

Cleaning the Outside

The stainless steel door and door handle can be cleaned
with a commercially available stainless steel cleaner.

&OHDQHUVZLWKR[DOLFDFLGVXFKDV%DU.HHSHUV)ULHQG

Soft Cleanser™ will remove surface rust, tarnish and
small blemishes.

8VHRQO\DOLTXLGFOHDQVHUIUHHRIJULWDQGUXELQWKH

direction of the brush lines with a damp soft sponge. Do
not use appliance wax or polish on the stainless steel.

Cleaning the Condenser

The condenser has fins and tubes that can become
clogged with dirt and lint.

NOTE:

Outdoor operation can lead to rapid buildup

of debris, such as leaves and other vegetation. The
condenser will need to be frequently checked for debris.
Clean it whenever the fins are obstructed.

To clean:

1.

Remove the kickplate and front service panel.

2.

/RFDWHWKHFRQGHQVHUVXUIDFH

3.

9DFXXPWKHVXUIDFHWRUHPRYHDOOGXVWGLUWDQGOLQW

NOTICE

Do not dent the fins.

4.

Return the kickplate and front service panel to their

RULJLQDOSRVLWLRQV)DVWHQWKHPWRWKHFDELQHWXVLQJ

the original screws.

Condenser surface

Cleaning the Ice Storage Bin

7KHLFHVWRUDJHELQVKRXOGEHVDQLWL]HGRFFDVLRQDOO\
,WLVXVXDOO\FRQYHQLHQWWRVDQLWL]HWKHELQDIWHUWKHLFH

making system has been cleaned and the bin is empty.

$VDQLWL]LQJVROXWLRQFDQEHPDGHRIR]RIKRXVHKROG
EOHDFKDQGJDOORQVRIKRWƒ)ƒ)ZDWHU8VH

a clean cloth and wipe the interior of the ice storage bin

ZLWKWKHVDQLWL]LQJVROXWLRQ3RXUVRPHRIWKHVROXWLRQ

down the drain.

Allow to air dry.

Winterizing

1.

Clean the ice making system per the instructions

above.

2.

Open the door. Push the

ON/OFF

button to turn the

ice machine off.

3.

Turn off the water supply.

4.

Drain the water reservoir by removing the rubber

stopper under the reservoir. It is located near the
back wall of the ice storage bin.

5.

Disconnect the incoming water line at the inlet water

valve.

6.

Open the door. Push the

ON/OFF

button to turn the

ice machine on.

7.

Blow air through the inlet water valve. A tire pump can

be used.

8.

Models with a drain pump installed should have about

JDOORQRI59DQWLIUHH]HSURS\OHQHJO\FROSRXUHG

into the ice storage bin drain.

NOTE:

$XWRPRWLYHDQWLIUHH]HPXVW127EHXVHG

9.

Turn off and unplug the machine.

Rubber stopper

Care And Cleaning

CARE AND

CLEANING

Página anteriorPágina siguiente

"Cargando la instrucción" significa que debes esperar hasta que el archivo se cargue y puedas leerlo en línea. Algunas instrucciones son muy grandes y el tiempo de carga depende de la velocidad de tu conexión a Internet.

Otros modelos de máquinas de hielo GE