Lasko 1646 - Manual de uso - Página 2

Rev. B 1/10

2

2085250

Rev. B 1/10

11

2085250

MODELO 1646

Su ventilador de pedestal con control remoto tiene, además,

Tiras de Fijacíon

. Quite la

Película Protectora

del dorso de

la pieza cuadrada de Tiras de Fijacíony adhiérala al control remoto. Quite la película protectora del dorso de la otra pieza
cuadrada de Tiras de Fijacíon y adhiérala a su ventilador. Ahora puede guardar su control remoto cuando no lo esté usando.

(Figura 14)

Si usted pierde su mando a distancia, por favor Cliente de llamada Serive para ordenar un reaplacement en 1-800 -233-0268,
de lunes a viernes, entre las 8 a.m. y las 5 p.m. (Horario Estándar del Este de los Estados Unidos).

CONTROL REMOTO

Figura 13

Botón

Temporizador

Botón

Alimentación

Botón

Velocidad

Baterías

AAA

Figura 14

Tiras De Fijacíon

Película

Protectora

Adhesivo

1. Instale la batería (no suministró) como se indica en la

Figura 13

. La batería es el tipo “AAA”.

2.

El Botón De Encendido

del Control Remoto está identificado como ( ).

3. Todas las funciones realizadas con el Control Remoto pueden realizarse de igual forma con los Controles Manuales.
4. No mezcle baterías viejas y nuevas. No mezcle baterías alcalinas, estándar (carbono-cinc) o recargables (níquel-cadmio).
5. No se deshága de baterías en el fuego. baterías pueden estallar o pueden salirse.

MODEL 5132

GENERAL SAFETY INFORMATION

When using electrical appliances, basic precautions should always be followed to reduce

the risk of fire, electrical shock and injury to persons, including the following:

SAVE THESE INSTRUCTIONS

Read all instructions before using this Fan.

1. Make certain the power source conforms to the electrical requirements of the Fan.

2. Make certain that the room is equipped with a working smoke detector.

3. Use this Fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock,

or injury to persons.

4. To reduce the risk of personal injury and electric shock, the Fan should not be played with or placed where small children can reach it.

5. Unplug power cord before installing, servicing, or moving the Fan.

DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN SERVICING

OR MOVING THE FAN. ALWAYS UNPLUG THE POWER CORD. ALWAYS TURN OFF AND UNPLUG FAN BEFORE

LEAVING THE AREA. NEVER LEAVE CHILDREN UNATTENDED WHEN THE FAN IS ON OR PLUGGED IN.

6. This Fan must

NOT

be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmospheres

where gasoline, paint or flammable liquids are used or stored.

7.

DO NOT

use Fan in or near a window. Rain may create an electrical hazard.

8. Completely assemble Fan, according to instructions, before connecting to power supply.

REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK - DO NOT USE THIS FAN

WITH ANY SOLID STATE SPEED CONTROL DEVICES.

9. Where possible, avoid the use of extension cords because the extension cord may overheat and cause a fire. If you must use an exten-

sion cord, minimize the risk of overheating by using the shortest cord possible and ensuring that it is UL listed.

NEVER

use a single

extension cord to operate more than one Fan. Do not plug Fan into any other cord connected device, such as a power strip, cord

reel, surge protector, multiple outlet adapters or outlet-type air fresheners. The use of such devices may create a fire hazard.

10.

NEVER

operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in any manner.

There are no user serviceable parts. Return Fan to an authorized service facility for examination, electrical or mechanical adjustment

or repair.

11.

NEVER

insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire,

or damage the Fan. To reduce the risk of fire,

DO NOT

block or tamper with the Fan in any manner while it is in operation.

12. Always place the Fan on a stable, flat, level surface when operating, to avoid the chance of the Fan overturning. Locate the Power

Cord so the Fan or other objects are not resting on it.

DO NOT

run Power Cord under carpeting.

DO NOT

cover Power Cord with

throw rugs, runners or the like. Arrange Power Cord away from room traffic and where it will not be tripped over.

13. This Fan is not intended for use in wet or damp locations.

NEVER

locate a Fan where it may fall into a bathtub or other water con-

tainer.

NEVER

use Fan where flammable liquids are used or stored.

14.

NEVER

use Fan outdoors.

15. Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this Fan. If this occurs,

move the Fan to another location.

16. Keep Fan remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the Fan.

17. This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please

refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical require-

ments for Agricultural Buildings.

THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).

18. This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or

local codes or standards relating to electrical requirements for Hazardous locations.

THIS FAN DOES NOT MEET THE REQUIRE-

MENTS OF NEC ARTICLE 500 (2008).

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock,

this plug is intended to fit in a polarized outlet only one way. Match wide blade of plug to wide slot. Fully

insert. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician. DO NOT attempt to defeat this safety feature.

This plug is a safety feature. Contains a safety device (fuse) that should not be removed. Discard product

if the attachment plug is damaged. To reduce the risk of fire, electric shock and personal injury, DO NOT

remove, replace, repair or tamper with the originally supplied plug. If the Fan does not function properly,

it may be due to the safety device incorporated in this plug. Call 800-233-0268, Monday - Friday, between

8:00 a.m. and 5:00 p.m. EST. If the plug warning label is missing or damaged, call the toll free number for a

replacement label.