Black & Decker 985115819M - Manual de uso

Please Read and Save this Use and Care Book.

IMPORTANT SAFETY

INSTRUCTIONS

When using your iron, basic safety precautions should always be followed,

including the following:

• READ ALL INSTRUCTIONS BEFORE USING.

• Use iron only for its intended use.

• To protect against a risk of electric shock, do not immerse the iron in water or

other liquids.

• Always turn iron off before plugging or unplugging from the electrical outlet. Never

pull on the cord to disconnect the iron from the electrical outlet; instead, grasp the

plug and pull on the plug to disconnect the iron.

• Do not allow cord to touch hot surfaces. Let iron cool completely before putting

away. Loop cord loosely around iron when storing.

• Always disconnect iron from electrical outlet when filling with water or emptying,

and when not in use.

• Do not operate iron with a damaged cord, or if the iron has been dropped,

damaged, or is leaking. To avoid the risk of electric shock, do not disassemble

the iron; take it to a qualified service person for examination and repair, or call the

appropriate toll-free number on the cover of this manual. Incorrect reassembly can

cause a risk of electric shock when the iron is used.

• Close supervision is necessary for any appliance being used by or near children.

Do not leave iron unattended while connected or on an ironing board.

• Burns can occur from touching hot metal parts, hot water or steam. Use caution when

you turn a steam iron upside down or use the surge of steam—there may be hot

water in the reservoir. Avoid rapid movement of iron to minimize hot water spillage.

• This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• The iron must be used and rested on a stable surface.

• When placing the iron on its stand, ensure that the surface on which the stand is

placed is stable.

• Do not operate the iron if it has been dropped, if there are visible signs of damage

to the iron or its cord, or if it is leaking.

• The iron must not be left unattended while it is connected to the electrical outlet.

SPECIAL INSTRUCTIONS

• To avoid a circuit overload, do not operate another high-wattage appliance on

the same circuit.

• If an extension cord is absolutely necessary, a cord rated at 15-ampere

should be used. A cord rated for less amperage can result in a risk of fire or

electric shock due to overheating. Care should be taken to arrange the cord

so that it cannot be pulled or tripped over.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the

risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If

the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a

qualified electrician.
Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of

the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the

outer cover. There are no user-serviceable parts inside. Repair should be done only by

qualified service personnel.

Note:

If the power supply cord is damaged, it should be replaced by qualified personnel or in Latin

America by an authorized service center.

HOW TO USE

This product is for household use only.

GETTING STARTED

• Remove any labels, stickers or tags attached to the body or soleplate of the iron, and the

plastic band around the power plug.

• Please go to www.prodprotect.com/blackanddecker to register your warranty.

Note:

Use ordinary tap water for ironing.

Important: For optimum performance, let the iron stand to preheat for 90 seconds

before beginning to iron.

Tip:

If unsure of a garment’s fiber, test a small area (on an inside seam or hem) before ironing.

FILLING WATER TANK

1. Grasp the water-fill cover and pull it out to expose the water-fill opening. Be careful not to pull

too hard as the water-fill cover is attached to the inside of the water-fill opening.

2. Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches

the MAX level mark on the water tank. Do not overfill.

Important: Be careful not to overfill the iron. Do not add water beyond the MAX mark on

the water tank. This may cause water to spill out of the soleplate.

3. After filling, be sure to push the water-fill cover securely back into the water-fill opening.

4. Plug in the iron.

STEAM IRONING

1. Turn the fabric select dial to appropriate setting for your fabric type. Read garment’s label to

help you determine fabric type. Be sure there is water in the reservoir.

2. When finished ironing, turn the fabric-select dial to MIN and unplug the iron.

Important: Always stand the iron on its heel rest when powered on but not in use.
SPRAY MIST

Use to dampen tough wrinkles at any setting.

1. Be sure the iron is filled with water.

2. On first use, pump the spray button a few times.

SURGE OF STEAM
Horizontal Steaming

Tip:

Use to remove stubborn creases.

1. With the water tank filled to the MAX mark, set fabric select dial to appropriate setting for your

fabric. Read garment’s label to help you determine fabric type.

2. Be sure there is water in the tank. Steam is automatically turned off on POLYESTER, SILK/NYLON

and SYNTHETIC settings.

3. For best performance, use surge of steam at 5-second intervals.

4. When finished ironing, turn the fabric select dial to MIN and unplug the iron.

Important: Always stand the iron on its heel rest when powered on but not in use.
Vertical Steaming

Tip:

Use as a steamer for removing wrinkles from hanging clothes and drapes.

1. Be sure the water tank is filled to the MAX mark.

2. Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be steamed

once they are hung.)

3. Set the fabric select dial to appropriate setting for your fabric type.

4. Hold the iron close to, but not touching, the fabric.

5. Pull the fabric tight in your free hand and press the steam burst button as you move the iron

over the fabric.

DRY IRONING

1. Turn the steam selector switch to dry ( ).

2. Turn the fabric select dial to appropriate setting for your fabric.

3. When finished ironing, make sure to unplug the iron.

EMPTYING WATER TANK

Important: Always empty the water after each use.

1. Unplug the iron and let it cool.

2. Empty the water tank. Hold the iron over a sink with the tip pointing down. Water will empty

out the water-fill opening.

CARE AND CLEANING

This product contains no user serviceable parts. Refer service to qualified service personnel.

CLEANING OUTSIDE SURFACES

1. Make sure iron is unplugged and has cooled completely.

2. Wipe the soleplate and outer surfaces with a soft cloth dampened with water and mild

household detergent.

3. Never use abrasives, heavy-duty cleansers, vinegar or scouring pads that may scratch or

discolor the iron.

4. After cleaning, steam iron over an old cloth to remove any residue from the steam vents.

AUTO CLEAN

™

SYSTEM

Tip: To keep the steam vents free of any buildup, follow these instructions about once a month:

1. Fill the water tank well below the MAX line. Plug in the iron.

2. Turn the fabric select dial to MAX and stand the iron on its heel rest. Allow it to heat.

3. Turn fabric select dial to MIN, unplug the iron and hold over a sink with the soleplate facing down.

4. Press and hold the steam selector switch in the AUTO CLEAN

™

position to the far left. Be

careful, as hot water and steam will come out of the steam vents. Continue to hold the switch

in the AUTO CLEAN

™

position until all the water has emptied. If necessary, rock iron side-to-

side and front-to-back.

5. When finished, release the switch and water is emptied from the tank. Stand the iron on its

heel rest and plug it in. Heat for about 2 minutes to dry out any remaining water.

STORING YOUR IRON

1. Check that the fabric-select dial is set to MIN.

2. Unplug the iron and let it cool completely.

3. Store iron on its heel rest. Storing iron on its soleplate can cause leaks or damage.

NEED HELP?

For service, repair or any questions regarding your appliance, call the appropriate 800 number

on cover of this book. Please DO NOT return the product to the place of purchase. Also, please

DO NOT

mail product back to manufacturer, nor bring it to a service center. You may also want to

consult the website listed on the cover of this manual.

Two-Year Limited Warranty

(Applies only in the United States and Canada)

What does it cover?

• Any defect in material or workmanship provided; however, Spectrum Brands, Inc,’s liability will

not exceed the purchase price of product.

For how long?

• Two years from the date of original purchase with proof of such purchase.

What will we do to help you?

• Provide you with a reasonably similar replacement product that is either new or factory

refurbished.

How do you get service?

• Save your receipt as proof of date of sale.

• Visit the online service website at www.prodprotect.com/blackanddecker, or call toll-free

1-800-465-6070, for general warranty service.

• If you need parts or accessories, please call 1-800-738-0245.

What does your warranty not cover?

• Damage from commercial use

• Damage from misuse, abuse or neglect

• Products that have been modified in any way

• Products used or serviced outside the country of purchase

• Glass parts and other accessory items that are packed with the unit

• Shipping and handling costs associated with the replacement of the unit

• Consequential or incidental damages (Please note, however, that some states do not allow the exclusion

or limitation of consequential or incidental damages, so this limitation may not apply to you.)

How does state law relate to this warranty?

• This warranty gives you specific legal rights. You may also have other rights that vary from

state to state or province to province.

Por favor lea este instructivo antes de usar el producto.

INSTRUCCIONES

IMPORTANTES DE SEGURIDAD

Cuando se utilizan aparatos eléctricos, siempre se debe respetar ciertas medidas

de seguridad a fin de reducir el riesgo de un incendio, un choque eléctrico y (o)

lesiones a las personas, incluyendo las siguientes:

• Lea todas las instrucciones antes de utilizar el producto.

• Use la plancha únicamente para planchar.

• No sumerja la plancha en agua ni en ningún otro líquido para evitar el riesgo de un

choque eléctrico.

• A fin de protegerse contra el riesgo de un choque eléctrico, no sumerja la plancha

en agua ni en ningún otro líquido. Siempre apague la plancha antes de enchufar o

desconectarla del tomacorriente. Nunca tire del cable para desconectar la plancha del

tomacorriente; sujete el enchufe y hálelo con cuidado. Siempre desconecte la plancha

del tomacorriente cuando no esté en uso y antes de llenar o vaciar el tanque de agua.

• No permita que el cable entre en contacto con superficies calientes. Permita que

la plancha se enfríe antes de guardarla. Enrolle el cable holgadamente alrededor

de la plancha.

• Siempre desconecte la plancha cuando la llene o la vacíe y cuando no esté en uso.

• No haga funcionar la plancha con un cable dañado, si la plancha se ha caído,

dañado o está goteando. A fin de reducir a un mínimo el riesgo de un choque

eléctrico, no desarme la plancha. Acuda a una persona de servicio, calificada

para revisar y efectuar las reparaciones necesarias. El armar la plancha

incorrectamente puede ocasionar el riesgo de un choque eléctrico cuando la

plancha esté en funcionamiento.

• Se requiere supervisión cuando cualquier unidad electrónica esté siendo usada

cerca de los niños o por ellos mismos. No desatienda la plancha mientras esté

conectada o cuando esté sobre la tabla de planchar.

• Pueden ocurrir quemaduras si se tocan las partes metálicas, el agua caliente, o el vapor.

Tome precaución al invertir una plancha de vapor ya que puede haber agua caliente

dentro del tanque. Evite los movimientos bruscos para no derramar agua caliente.

• Este aparato no está diseñado para ser usado por personas (incluído niños) con

capacidad limitada fisica, mental o sensoriales disminuidas y falta de experiencia o

conocimiento que les impida utilizar el aparato con toda seguridad sin supervisión o

instrucción.

• Se debe asegurar la supervisión de los niños deben para evitar que usen el aparato

como juguete.

• La plancha debe usarse o colocarse en una superficie plana y firme.

• Cuando se coloca la plancha sobre el talón de descanso, asegúrese de que la

superficie sea plana y firme.

• La plancha no se debe usar si se ha caido, si se ha dañado o si está goteando.

• El producto no debe ser desatendido mientras esté conectado a la corriente

eléctrica.

INSTRUCCIONES ESPECIALES

• Para evitar sobrecargas, no opere ningún otro aparato de alto consumo de corriente

en el mismo circuito.

• Si el uso de un cable de extensión es absolutamente necesario, se deberá

utilizar uno de 15 amperios. Un cable de menor amperaje se puede

sobrecalentar y resultar en un riesgo de incendio o descarga eléctrica. Se debe

tener cuidado de acomodar el cable de manera que nadie lo hale ni se tropiece.

CONSERVE ESTAS INSTRUCCIONES.

Este aparato eléctrico es para uso doméstico solamente.

ENCHUFE POLARIZADO

Este aparato cuenta con un enchufe polarizado (un contacto es más ancho que el otro).

A fin de reducir el riesgo de un choque eléctrico, este enchufe encaja en un tomacorriente

polarizada en un solo sentido. Si el enchufe no entra en el tomacorriente, inviértalo y si

aun así no encaja, consulte con un electricista. Por favor no trate de alterar esta medida

de seguridad.

TORNILLO DE SEGURIDAD

Advertencia: Este aparato cuenta con un tornillo de seguridad para evitar la remoción de

la cubierta exterior del mismo. A fin de reducir el riesgo de incendio o de choque eléctrico,

por favor no trate de remover la cubierta exterior. Este producto no contiene piezas

reparables por el consumidor. Cualquier reparación debe ser realizada solamente por

personal de servicio calificado.

Nota:

Si el cordón de alimentación esta dañado, en América Latina debe sustituirse por personal

calificado o por el centro de servicio autorizado.

COMO USAR

Este product es solamente para uso doméstico.

PRIMEROS PASOS

• Retire toda etiqueta o calcomanía adherida al cuerpo o a la suela de la plancha y la tira plástica

alrededor del enchufe.

• Por favor, visite www.prodprotect.com/blackanddecker para registrar su garantía.

Nota:

Utilice agua de la llave para llenar el tanque de la plancha.

Importante: Para óptimo rendimiento, se recomienda dejar reposar la plancha durante 90

segundos antes de comenzar a planchar.

Consejo:

Para evitar daño a las prendas, si desconoce la fibra de cierto tejido, ensaye primero

sobre una superficie pequeña y planche una costura o ruedo interior.

LLENAR EL TANQUE DE AGUA

1. Sujete la cubierta del orificio de llenado de agua y hálela hacia afuera hasta que vea el orificio

de agua. Tenga cuidado de no halar demasiado ya que la cubierta está conectada a la parte de

adentro del orificio.

2. Incline la plancha y con la ayuda de una taza de medir, vierta agua a través del orificio de llenado

hasta alcanzar la marca del nivel MAX del tanque. No exceda el nivel de llenado.

Importante: Tenga cuidado de no sobrellenar la plancha. No añada agua por encima de la

marca MAX del tanque. Esto puede causar que el agua se derrame por la suela de la plancha.

3. Después de llenar el tanque de agua, empuje bien la cubierta del orificio hasta quedar segura.

4. Enchufe la plancha.

PLANCHADO AL VAPOR

1. Gire el selector de tejidos al ajuste apropiado, según el tejido de la prenda. Lea la etiqueta de la

prenda que desea planchar para determinar el tipo de tejido. Asegúrese de que haya agua en el

tanque.

2. Al terminar de planchar, ajuste el selector de tejido al nivel más bajo, pase el selector a la

posición MIN y desconecte la plancha.

Importante: Siempre coloque la plancha sobre su talón cuando esté encendida pero no en uso.

IR20V_IB_21272.indd 1

10/23/17 5:12 PM