AEG BSB 12G NC-142C 416760 Conductor impactante – Manual de instrucciones en formato pdf, léalo en línea gratis. Esperamos que le ayude a resolver cualquier duda que pueda tener al utilizar el aparato.
Si aún tiene preguntas, escríbalas debajo del manual de instrucciones.
"Estamos cargando el manual" significa que debe esperar a que se cargue el archivo para poder leerlo en línea. Algunos manuales son muy pesados y el tiempo que tardan en aparecer depende de su velocidad de internet.
10
BS 12G
BS 14G
BSB 12G
BSB 14G
........ 10 mm ..............10 mm................ 10 mm ................... 10 mm
........ 30 mm ..............32 mm................ 30 mm ................... 32 mm
............ - ....................... - ...................... 6 mm ..................... 8 mm
....... 4,2 mm .............4,2 mm............... 4,2 mm .................. 4,2 mm
...0-350 /min ....... 0-400 /min .......... 0-350 /min ............. 0-400 /min
.0-1350 /min ..... 0-1400 /min ........ 0-1350 /min ........... 0-1400 /min
............ - ....................... - ..............20 250 /min ............21 000 /min
........ 30 Nm ...............32 Nm ................ 30 Nm ................... 32 Nm
........ 12 V ...............14,4 V ................... 12 V ................... 14,4 V
.....1-10 mm .......... 1-10 mm............. 1-10 mm ................ 1-10 mm
..... 1,65 kg ..............1,95 kg ................. 1,8 kg .................... 2,1 kg
........ 90 dB(A) ...........90 dB(A) ............. 90 dB(A) ................ 90 dB(A)
...... 101 dB(A) .........101 dB(A) ........... 101 dB(A) .............. 101 dB(A)
............ - ....................... - ................. 15,6 m/s
2
............... 13,7 m/s
2
............ - ....................... - ................... 1,5 m/s
2
................. 1,5 m/s
2
...< 2,5 m/s
2
...... < 2,5 m/s
2
.........< 2,5 m/s
2
.............< 2,5 m/s
2
....... 1,5 m/s
2
............1,5 m/s
2
............. 1,5 m/s
2
................. 1,5 m/s
2
...< 2,5 m/s
2
....... < 2,5 m/s
2
.........< 2,5 m/s
2
.............< 2,5 m/s
2
....... 1,5 m/s
2
............1,5 m/s
2
............. 1,5 m/s
2
................. 1,5 m/s
2
Drilling capacity in steel ..........................................................
Drilling capacity in wood .........................................................
Drilling capacity in brick and tile .............................................
Wood screws (without pre-drilling) ..........................................
No-load speed 1st gear ..........................................................
No-load speed 2nd gear .........................................................
Rate of percussion under load max. .......................................
Torque .....................................................................................
Battery voltage ........................................................................
Drill opening range .................................................................
Weight with battery (1.4 Ah)
...................................................
Noise/vibration information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A)) ..........................................
Sound power level (K = 3 dB(A)) ..............................................
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined according to EN 60745.
Vibration emission value a
h
Percussion drilling into concrete ...............................................
Uncer tainty K= .........................................................................
Drilling into metal ......................................................................
Uncer tainty K= .........................................................................
Screwing ..................................................................................
Uncer tainty K= .........................................................................
*1 Measured according to AEG norm N 877318
GB
English
Do not dispose of used battery packs in the household refuse or
by burning them. AEG Distributors offer to retrieve old batteries to
protect our environment.
Do not store the battery pack together with metal objects (shor t
circuit risk).
Use only System GBS chargers for charging System GBS battery
packs. Do not use battery packs from other systems.
No metal par ts must be allowed to enter the battery section of the
charger (shor t circuit risk).
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it off immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Wear a suitable dust protection mask.
WARNING!
Read all safety warnings and all instructions, including those
given in the accompanying brochure.
Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
Wear ear protectors.
Exposure to noise can cause hearing loss.
Hold power tool by insulated gripping surfaces, when performing
an operation where the fastener may contact hidden wiring.
Fasteners contacting a “live” wire may make exposed metal par ts of
the power tool “live” and could give the operator an electric shock.
Always wear goggles when using the machine. It is recommended to
wear gloves, sturdy non slipping shoes and apron
.
Sawdust and splinters must not be removed while the machine is
running.
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
Remove the battery pack before star ting any work on the machine.
SAFETY INSTRUCTIONS
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
TECHNICAL DATA
Cordless drill
Cordless impact drill
¿Tiene más preguntas?¿No ha encontrado la solución a su problema en el manual o tiene otros problemas? Haga su pregunta en el siguiente formulario con una descripción detallada de su situación para que otras personas y expertos puedan responderla. Si sabe cómo resolver el problema de otra persona, ayúdele :)
