GE GFD65ESSVWW - Manual de uso

GE GFD65ESSVWW

Secadora GE GFD65ESSVWW - Manual de uso, léela gratuitamente en línea en formato PDF. Esperamos que esto te ayude a resolver cualquier duda que puedas tener. Si tienes más preguntas, contáctanos a través del formulario de contacto.

1 Page 1 2 Page 2 3 Page 3 4 Page 4 5 Page 5 6 Page 6 7 Page 7 8 Page 8 9 Page 9 10 Page 10 11 Page 11 12 Page 12 13 Page 13 14 Page 14 15 Page 15 16 Page 16 17 Page 17 18 Page 18 19 Page 19 20 Page 20 21 Page 21 22 Page 22 23 Page 23 24 Page 24 25 Page 25 26 Page 26 27 Page 27 28 Page 28 29 Page 29 30 Page 30 31 Page 31 32 Page 32 33 Page 33 34 Page 34 35 Page 35 36 Page 36 37 Page 37 38 Page 38 39 Page 39 40 Page 40 41 Page 41 42 Page 42 43 Page 43 44 Page 44 45 Page 45 46 Page 46
Página: / 46
Página siguiente
Cargando la instrucción

32

49-3000206 Rev 8

Installation Instructions

REVERSING THE DOOR SWING (Optional)

IMPORTANT NOTES

• Handle parts carefully to avoid scratching paint.
• Provide a non-scratching work surface for the door.
• Set screws down by their related parts to avoid using

them in the wrong places.

•

Once you begin, do not move the cabinet until

door-swing reversal is completed.

•

These instructions are for changing the hinges from the

right side to the left side—if you ever want to switch them

back to the right side, follow these same instructions and

reverse all references to the left and right.

REMOVE THE STRIKE PLATE

AND DOOR ASSEMBLY

•

Open the dryer door.

•

Remove the two screws from the strike plate using

a T-25 torx driver.

•

Remove the strike plate and set it aside.

•

While supporting the door, remove the two screws

from the hinge in the dryer face using a 1/4” (6.4 mm)

nut driver.

•

Lift the door assembly to remove it from the dryer

face and set it aside on a protective surface.

1

ˆ

Phillips-head screwdriver

ˆ

T-25 torx driver

ˆ

1/4” (6.4 mm) nut driver

TOOLS YOU WILL NEED

BEFORE YOU START

Unplug the dryer from its electrical outlet.

REMOVE THE INNER DOOR

•

Remove the 14 screws from the inner door frame
using a Phillips-head screwdriver and set them aside.

•

Remove the inner door frame from the outer door.

NOTE:

Do not remove the gasket from the inner door

frame.

2

Hold the Door and

Remove Hinge Screws

from the Dryer

Remove Strike

Plate and Screws

Hinge and Door

Assembly

Página siguiente

"Cargando la instrucción" significa que debes esperar hasta que el archivo se cargue y puedas leerlo en línea. Algunas instrucciones son muy grandes y el tiempo de carga depende de la velocidad de tu conexión a Internet.

Otros modelos de secadoras GE

Todos los secadoras GE