Big Ass Fans MK-I61-051800A729S2 - Manual de uso - Página 24

Ventilador de techo Big Ass Fans MK-I61-051800A729S2 - Manual de uso, léela gratuitamente en línea en formato PDF. Esperamos que esto te ayude a resolver cualquier duda que puedas tener. Si tienes más preguntas, contáctanos a través del formulario de contacto.
Índice:
- Página 2 – BEFORE YOU START; AVANT DE COMMENCER | ANTES DE COMENZAR; ☑ Turn off Power at Breaker
- Página 4 – Concrete Ceiling; Plafond en béton | Techo de concreto; Outlet Box; Boîte de dérivation | Caja de distribución; Install Mounting Bracket
- Página 8 – Prepare Wiring Cover and Trim; Insert wiring; Sloped Ceiling; Plafond incliné | Techo inclinado; Flat Ceiling; Plafond non incliné | Techo plano
- Página 9 – Raise fan to mounting bracket. Align rib in; Power wires; Suspension du ventilateur | Colgar el ventilador
- Página 10 – Câblage du ventilateur | Cablear el ventilador; Supply Power; Australia; Supply Power Wire Color Chart
- Página 11 – Secure Safety Cable; Anchor Hook; Crochet d’ancrage | Gancho de anclaje
- Página 12 – Secure Wiring Cover; Building Structure; Shackle
- Página 13 – Montage des pales | Instalar las aspas aerodinámicas; of fan from previous airfoil to prevent fan from tilting.; Make sure numbered sticker on; When fi nished, repeat tightening sequence.; Verify all six screws are fully tightened by
- Página 15 – Top View; Vue du dessus | Vista superior; Side View; Vue latérale | Vista lateral
- Página 17 – Install Wiring Harness and Mounting Plate; Disconnect power before wiring fan.
- Página 18 – Wiring
- Página 20 – Ensure terminal is; Secure Safety Cable
- Página 22 – Secure Safety Clips and Wiring Cover; Safety Clip; Structure du bâtiment | Estructura del edifi cio
- Página 26 – –10 V Wiring (for fans ordered with 0–10 V option); controller supplying a 0–10 V signal.; Make sure each controller has a maximum current
- Página 27 – Câbler le ventilateur | Cablear el ventilador; Route 0–10 V wiring into downrod and connect to 0–10 V wires; before securing downrod to fan; Route 0–10 V wiring through mounting plate and connect to 0–10 V; Fan 0–10 V Input Channel
- Página 28 – Removing Covers and Light Kit; Universal Mount
REV. O | 09/22/2022 | © 2019 DELTA T LLC Ι ALL RIGHTS RESERVED.
24
7. Install Light Kit or Lower Cover
Mise en place du kit d’éclairage ou du cache inférieur
Instalar el kit de luz o la cubierta inferior
CAUTION: To reduce the risk of electric shock, disconnect power to fan before
installing light kit.
ATTENTION : Afi n de prévenir tout risque de choc électrique, coupez l’alimentation du ventilateur avant
d’installer le kit d’éclairage.
PRECAUCIÓN: Para reducir el riesgo de descarga eléctrica, desconecte el ventilador de la alimentación
eléctrica antes de instalar el kit de luz.
Plug light kit wiring harness into receptacle on bottom of fan. Align slots on light or lower
cover with tabs on bottom of fan and twist light or lower cover clockwise to lock.
Branchez le faisceau de fi ls du kit d’éclairage au connecteur situé dans la partie inférieure du ventilateur. Alignez
les fentes sur les languettes sur la base du ventilateur et tournez dans le sens horaire pour verrouiller.
Enchufe el arnés del cableado del kit de luz en el conector de la parte inferior del ventilador. Alinee las ranuras
de la luz o la cubierta inferior con las lengüetas de la parte inferior del ventilador y gire en el sentido de las
manecillas del reloj para asegurarlas.
Lower Cover
Cache inférieur
Cubierta inferior
Light Kit
Kit d’éclairage
Kit de luz
Use only light kit model 010450. Light Kit Weight: 2.2 lb (998 g)
Utilisez exclusivement le modèle 010450. Poids du kit d’éclairage : 998 g (2,2 lb)
Solo utilice el kit de luz modelo 010450. Peso del kit de luz: 2.2 lb (998 g)
Use only light kits marked “Suitable for Use in Damp Locations.”
Utilisez uniquement des kits d'éclairage portant la mention « Convient pour une utilisation dans des endroits humides ».
Use solo los kits de luz marcados como “Apto para usarse en lugares húmedos”.
"Cargando la instrucción" significa que debes esperar hasta que el archivo se cargue y puedas leerlo en línea. Algunas instrucciones son muy grandes y el tiempo de carga depende de la velocidad de tu conexión a Internet.
Resumen
REV. O | 09/22/2022 | © 2019 DELTA T LLC Ι ALL RIGHTS RESERVED. WARNING: Installation must be in accordance with the requirements set forth by the National Electrical Code (NEC, United States), ANSI/NFPA 70, and all national and local codes.The ground wire must be connected to the supply grou...
TOUS DROITS RÉSERVÉS. | TODOS LOS DERECHOS RESERVADOS. 3 Concrete Ceiling Plafond en béton | Techo de concreto Route power wiring to fan location. Use mounting bracket as drilling template and drill four holes. Attach mounting bracket to ceiling using four Ø 6 mm anchor bolts*. If required by loca...
TOUS DROITS RÉSERVÉS. | TODOS LOS DERECHOS RESERVADOS. 7 5. Prepare Wiring Cover and Trim Préparation du couvre-fils et de son enjoliveurPreparar la tapa del cableado y la pieza de acabado Select sloped ceiling wiring cover trim or flat ceiling wiring cover trim. Insert wiring cover trim into wiri...
Otros modelos de ventiladores de techo Big Ass Fans
-
Big Ass Fans FR127C-U1H00-3L00-09258-258P61
-
Big Ass Fans FR127C-U1H00-3L00-09259-259P61
-
Big Ass Fans FR127C-U1H00-3L0209258-532P610
-
Big Ass Fans MK-HK4-04240001A258F221G10
-
Big Ass Fans MK-HK4-04240001A258F222G10
-
Big Ass Fans MK-HK4-04240001A259F221G10
-
Big Ass Fans MK-HK4-04240001A470F221G10
-
Big Ass Fans MK-HK4-04240001A470F222G10
-
Big Ass Fans MK-HK4-04240001A471F221G10
-
Big Ass Fans MK-HK4-04240001A471F222G10